Cub Cadet 6 x 4 Big Country - Manual (Page 8)

Section 1: Introduction
1 - 3
1
4.3. Universal Joint Spacer Tool: See Figure 4.3.
4.4. Part Number 703-05104 is used to set the cor-
rect clearance between the end of the axle
assembly and the end of the universal joint on
the drive axles. See Figure 4.4.
Figure 4.3
Universal Joint Spacer Tool
Part Number 703-05104
Figure 4.4
Universal Joint
Spacer Tool
In Position
4.5. Two 1/4” by 4 1/2” long dowel pins are used to
lock the roller-type chain Tensioner in the
released position. The can be made or pur-
chased locally. See Figure 4.5.
5. Consumable Parts:
Component Part Number
Oil Filter 15400-P OH-
305PE
Air Filter 751-3027
Drive Belt 754-0646
Battery (Shipped Dry) 925-1707E
Figure 4.5
Side of Frame
Between Drive Axles
Dowel pins used to lock chain tensioners
in the released position