Cub Cadet GT1554 - Manual (Page 33)

33
SECTION 15: SPECIFICATIONS*
* Cub Cadet reserves the right to change product specifications, design, and standard equipment without notice and without incurring obligation
** Kohler’s horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine horsepower is lower and
affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed and ambient
operating conditions (temperature, humidity, and altitude).
GT1554
Capacities
Fuel Tank 3.5 gal. (13.2 liters)
Engine Crankcase (w/ filter) 57.5 oz. (1.7 liters)
Transmission 76 oz. (2.25 liters)
Hydrostatic Transmission
Make Hydro-Gear
Gear Ratio 22.2:1
Forward Speed 0 m.p.h. - 5.2 m.p.h.
Reverse Speed 0 m.p.h. - 2.3 m.p.h.
Engine (Air-cooled, 4-cycle)
Make Kohler Courage
Model SV740
Cylinders Twin
Bore 3.27 in. (83 mm)
Stroke 2.64 in. (67 mm)
Displacement 44.2 cubic in. (725 cc)
Power @3600 RPM 25 HP (18.6 kW)**
Maximum Torque 45.2 ft. lb. (61.2 Nm)
@ 2000 RPM
Compression Ratio 9:0:1
Engine Speed (governed) 3375 RPM
Low Speed 1200 RPM (± 75 RPM)
Spark Plug Gap .030 in. (.76 mm)
Electrical System
System Voltage 12-volt Negative Ground
Battery 235 CCA (sealed)
Alternator 15 Amp Regulated
Fuse (automotive type) 20 Amp
Headlights Incandescent
Brakes Single Disc (Dry)
Turf Tires
Front (inches) 16 x 7.5 x 8
Rear (inches) 23 x 10.5 x 12
Dimensions
Cutting Width, Deck 54 in. (137.2 cm)
Wheelbase 46 in. (116.8 cm)
Length, over all 68 in. (172.7 cm)
Width, over all 60 in. (152.4 cm)
Height, over all 43 in. (109.2 cm)
Ground Clearance 4.5 in. (11.4 cm)
Turning Radius 21 in. (53.3 cm)
Weight (approximate) 529 lb. (240 kg.)