Cub Cadet 310-3000 - Manual (Page 11)

310-3000 IHT 7
BRAKE MAINTENANCE
BRAKE SETTING
1. Remove the brake arm bias spring, and
then the cotter pin securing the brake castle
nut.
2. Insert a 0.015" (.381 mm) feeler gage be-
tween the brake disc and top brake puck,
and then set the brake by tightening or
loos en ing the cas tle nut.
3. Adjust brake gap to 0.015" (.381 mm) clear-
ance.
4. Install the cotter pin to secure the castle nut,
and then install the brake arm bias spring.
RETURN TO NEUTRAL SETTING
(OPTIONAL FEA TURE)
The return to neutral mechanism on the trans-
mis sion is designed to set the di rec tion al control
into a neutral position. An optional feature, it is
available in two versions. One version provides
hand con trol, and the other, foot control. Setting
pro ce dures are provided on pages 9 and 10.
WARNING
POTENTIAL FOR SERIOUS IN JU RY
Certain procedures require the vehicle
engine to be operated and the vehicle to
be raised off of the ground. To prevent
pos si ble injury to the servicing tech-
ni cian and/or by stand ers, insure the
ve hi cle is properly secured.