Doepfer d3c Midi/USB Organ Controller - Manual (Page 9)

d3c Page 9 User's Guide V1.0
FOOT CONTROL
]
/
^
These stereo jack sockets can be used to connect two foot controllers. Do not connect the
foot controller unless the d3c is switched off. The foot controller functions are fixed to these
paremeters:
Foot Control 1 (
^
): Loudness
Foot Control 2 (
]
): Expression
We recommend the usage of the foot controllers FP5. Foot controllers are not included with
the d3c and have to be ordered separately if required. You may use even other foot
controllers that are connected in this way:
If you do not want to use a foot controller the socket remains unconnected.
FOOT SWITCH
_
This stereophonic jack socket can be used to connect a double foot switch. Do not connect
the foot switch unless the d3c is switched off. The foot switch functions are fixed to these
paremeters:
Left foot switch: Rotator Slow/Fast (toggling)
right foot switch: Rotator On/Off (toggling)
We recommend the usage of the foot switch VFP2. The foot switch is not included with the
d3c and has to be ordered separately if required. You may use even another foot switch that
uses contacts that are closed at rest (i.e. the contacts open when operated).
If you do not want to use a foot switch the socket remains unconnected.
high
end
low
end
10-100k linear
Foot control connection