Fire By Design AUTOMATED TIKI TORCH - Manual (Page 9)

9
Daisy Chain Wiring of Tiki Torches
When wiring tiki torches in series (aka “Daisy Chain” Wiring) it is important to keep the polarity
BETWEEN the tiki torches the same. Protruding from the bottom of the Tiki Torch head are two
wires: a “White” wire and a “White/Blue” wire. These are the power wires.
In the illustration below you see two tiki torch heads with a Black wire and a Blue Wire. Due to the
fact you would not be able to see a “White” wire on this page we substituted it with a Black wire in the
illustration. If you look closely, the Black wire from BOTH tiki torches are connected to the same
(orange) wire and the Light Blue wire from BOTH tiki torches are connected to the same (dark blue)
wire.
When Daisy Chaining two or more tiki torches this wiring method must be followed.
Polarity between the tiki torches and the transformer DOES NOT matter. ONLY the polarity
BETWEEN the tiki heads matters.