Flylink Full HD G-sensor GPS - Manual (Page 14)

13
GPS Instructions
1. Connect GPS module on machine, as shown below:
2. After starting the car, the car charger will provide power
for driving recorder. The machine is started and begins to
record automatically (TF card needs to be inserted well).
3. The satellite icon on screen will flash while seeking for
signals from satellite. When GPS receives signals and
connects successfully, the satellite icon will be on all the
time.
When GPS receives signals and connects successfully, the
recorded files will have relevant information of satellite
signal; for example: your geographic location, and value of
located longitude and latitude. (If GPS module is not
connected or signals are not received normally or connected
successfully due to external factors, the satellite icon will be
flashing; if the recorded file is playing at this time, you can not
see detailed position information from GPS signal).
GPS interface
GPS plug