Flylink Full HD G-sensor GPS - Manual (Page 8)

7
1. Recording
When the machine is in the mode of recording, if there is a
symbol in top left corner, press OK key to start recording.
While recording, the symbol in top left corner starts to flash.
Press OK key again to stop recording; meanwhile, the symbol
in top left corner disappears.
Press the MENU key once, and then press MENU key again to
enter into “system settings” option. Now the “system settings”
is listed.
Date/Time: Which can adjust current date and time
Language Setting: Choose language according to the
requirements.
Key tone: Choose ON or OFF.
TV Mode: Which can set NTSC/PAL
Light Source Frequency: Which can choose 50HZ/60HZ
(current frequency)
Screen Saver: Which can save screen protection
Fill-in Light: Set the light on or off
Formatting: Format the memory card
Default Settings: Restore factory settings
Version: View current software version of driving recorder
Recording Method and Settings of Record Options