Flylink HD Webcam - Manual (Page 4)

3. Motion detection: On/Off. The device will start video recording automatically while there is an
object moving. During recording, the device will save each video file in every 2 minutes
automatically. When there is no object moving in two minutes, it enters into standby state, and
re-start when object moving again.
4. Cycle shooting: turn on / turn off
5. Cycle shooting time: the saving time of each section: 2 minutes/ 5 minutes / 10 minutes
6. Sound： Turn on/ off to select the sound
7. Power off delay：Delay for 10 minutes or 20 minutes.
After selection, click “OK” button to confirm, setting completed. Then click “MANU” to exit.
Photos Setting
Power on; Press “MODE” button to enter photos mode. Choose “MENU” to enter the menu setting
mode. Then press “DODE” to select:
1.Photos size：2592x1944 / 2048x1536 / 1600x1200 / 1280x1024,
2. Photos quality：Very Good / Good/ Normal
3. Photos mode：Turn Off/ 2S autodyne/10S autodyne/ Continuous
4. Exposure：Exposure luminance adjustment;
5. Date stamp：Turn Off / Date/ Time
After selection, click “OK” to confirm, setting completed. Then click “MANU” to exit.
Playback Setting
Power on; Twice-
press “MODE” button to enter the audio recording mode, and three-press to
playback mode. Select “MENU” button to enter the menu setting mode. Then press “MODE” to
select:
1. File locking: Lock / Unlock single / Lock all / Unlock all.
2. File deletion: Delete single / Delete all
3. Slideshow: Start / 2S intervals / cycle /yes
4. Voice Memo: Add, Delete;
5. Setting as Theme Power Up Image: Yes / No
After selection, press “OK” to confirm, setting completed. Then press “MANU” to exit.
System Setting
Power on; Press “MANU” to enter menu setting when it is in video recording mode. Then choose the
System Setting by “MODE” button, and press “OK” to confirm.
1. Sound Setting:
Shutter Sound: Turn On / Turn Off.
Power On Sound: Three sounds for selection, Or no sound.
Keypad tone: Turn On / Off.
Volume: 0、1、2、3， ” 0” is silence
2. Power Frequency: 50HZ, 60HZ
3. Auto Power Off：1 MIN， 3 MINS，5MINS
4. Screensaver: Turn Off, 10 Seconds, 20 Seconds, 30 Seconds
5. Date and Time Setting: Month/Day/Year Hour/Minute