Flylink HD Webcam - Manual (Page 2)

1. Insert the SD/MMC card before started. Disconnect the AC
power or Lithium battery to reset when device crashed.
2. LED indicator: Power on / Charging.
3. Power on to enter into video recording mode. Press
“ ”
button to start video recording. Repress
“ ” button to
save the video file and stop video recording.
4. Connect with car charger USB power supply to start video
recording automatically. And disconnect to auto save the
file and power off.
Ⅴ.Function Keys
1.
“
c
“ Key: Power On/ Off ( short press to power on,
long press 3 seconds to power off)
2.
“
” Key: Confirm
3.
“ MODE“ Key: Mode switching among video,
camcorder, recorder, browser
4.
“MENU” Key: Menu
5. “UP” Key: go up
6. “DOWN” Key: go down
Ⅶ. Menu settings
1. Video settings
1) Turn on the device
2) Press the “MODE” button to switch to Video interface
3) Press the “MENU” button to enter into “video settings”/ “system
settings ”
4) Press the “MENU” button to exit
5) Others:
 Video size : 1280x720/720x480/640x480
 Video timestamp : shut/open
 Cycle video : open/shut
 The time of cycle video:1min/2min ….
 Video voice : open/shut