Cuisinart Baby Electric Steam Sterilizer CS-6 - Manual (Page 4)

4
BEFORE THE FIRST USE
Carefully unpack the unit and remove any
packaging and promotional labels in or on the
sterilizer. Rinse all accessories thoroughly with
warm soapy water.
OPERATION
Before you begin sterilizing, thoroughly wash
all bottles and feeding accessories in warm
soapy water or in the dishwasher.
1. Remove the measuring cup from the
sterilizer lid by popping it up from the
bottom edge.
2. Lift off the sterilizer lid and set it aside.
3. Fill the measuring cup with water to the
fill line on the side of the measuring cup
(100mL), then pour it into the sterilizing
chamber.
NOTE: DO NOT EXCEED the
recommended amount of water.
4. Slide the stem through the lower tray
to assemble, then place them in the
sterilizing chamber.
5. Place the bottles neck downward into
the designated areas on the lower tray.
Note: The tray hold up to 6 of the largest
bottles available.
6. Lift the upper tray by the center post in
the middle of the tray and slide it over
the stem attached to the lower tray in the
steaming chamber.
1. 3.
5. 6. 4.
2.