Hangar 9 Twist 60 ARF - Manual (Page 19)

19
 .Step 9
Plug.the.motor.into.the.speed.control..Secure.the..
batteries.using.the.hook.and.loop.strap..Plug.the.speed.
control.into.the.receiver..Mount.the.speed.control.inside.
the.fuselage.so.it.will.not.interfere.with.the.installation..
and.removal.of.the.batteries.
Note:.Apply.a.piece.of.hook.and.loop.(not.
included).in.the.batteries.and.battery.tray.if.
you.find.the.batteries.slide.forward.or.aft.
 .Step 10
Turn.on.the.radio.system..Plug.the.wiring.harness.
assembled.in.Step.4.into.the.batteries.and.speed.control..
Use.the.throttle.on.the.transmitter.to.check.that.everything.
is.working.correctly..Check.that.the.motor.is.rotating.
counterclockwise..If.not,.follow.the.directions.included.
with.the.speed.control.to.correct.the.situation.
 .Step 11
Once.the.motor.is.working.and.rotating.in.the.correct.
direction,.unplug.the.wiring.harness.for.safety..Use.a.
hobby.knife.to.remove.the.covering.from.the.opening.that.
is.closest.to.the.magnets.so.the.hatch.can.be.removed..
Snap.the.battery.hatch.back.onto.the.fuselage.
 .Step 12
Install.the.propeller.and.spinner.using.the.instructions.
included.with.your.particular.motor.
Section 3B: Electric Motor Installation