Crosley Radio Crosley Full Size Jukebox CR12-10 - Manual (Page 4)

Radio Operation
6 9
1
Remove packing materials from unit.
Note: Save all packing materials.
2
Remove plastic safety cover from A/C plug.
3
Remove tie from A/C cord
1
Unwind the AC POWER CORD (24) at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
Note:This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
3
Plug A/C cord into appropriate outlet.
Power Source
Basic Operation
4
To locate your saved stations:
Select the band by pressing MODE button(10/30)
to toggle between CD Player / Radio. Press
BAND (11/32) to scroll through band selections
FM 1 through AM 2. If you have stations saved at
the FM 1 display, use button numbers 1 through
6 to find stored channels in that section.
Press BAND(11/32) to move to FM 2, then use
buttons 1 through 6 to scroll through the saved
channels in the FM 2 location. Repeat for each
additional band mode. You can also let the
system automatically scan through your preset
stations. To automatically scan your presets,
press the AMS button(13/44) and hold for less
than 2 seconds. When it reaches a station that
you wish to listen to, press AMS button(13/44)
again to halt the scan.
5
Adjusting the Volume, Bass, Treble and
Speaker Balance:
To adjust the Volume press the round SELECT
button(16/33) located near the center of the
control console. The LCD display will show VOL.
Next press the arrow up(17) or arrow down(14)
located on the large Volume button.
Hold until the desired sound level is reached.
The level will display as 0 through 15 in the
LCD display window.
To set the BASS level press the SELECT(16/33)
repeatedly until your see BASS display on the
LCD screen. Next use the large Volume button to
increase or decrease the BASS sound. The level
range will display between -10 through +10 in the
LCD display window. Release the Vol button
when the desired level is reached.
To adjust the Treble sound, repeatedly press the
SELECT button(16/33) until TREBLE is shown in
LCD display. Treble range is also -10 through+10.
Press and hold the Vol up or Vol down button until
desired treble level is reached.
To adjust the speaker balance press the SELECT
button(16/33) repeatedly until BALANCE is
shown in the LCD display window. Then press
and hold the Vol up or Vol down until the desired
balance is reached. Range of 0 through 10 in each
direction is shown in the display window.
6
Mute:
To quickly silence the sound in either theCD or
AM/FM Radio mode, press the MUTE button
(12/37) located in the lower right of the front
control panel. You will see "Mute" display in
the LCD window if this function is activated.
Getting Started
Unpacking
1
To select stations:
On the AM/FM radio push the Power button(4/47)
to turn the unit on. Next press the MODE
button(10/30) to select between CD or Radio
mode. The LCD display will show FM 1, FM2,
FM3, AM 1,or AM 2.
NOTE: The FM 1, FM 2, etc. are not different
FM bands. There are actually only two bands, FM
or AM. The numbers 1, 2,3, on FM and numbers
1,and 2 on the AM band allow you to save up to
six of your favorite stations in each selected "band".
2
To select the first FM station:
Press the Band button(11/32) to select the
desired listening band. Press the Forward Skip
(9) or Back Skip (8) buttons to seek the next
available station. To manually search for stations,
Press and hold either the Forward Skip (9) or
Back Skip (8) button until the display reads
“MANUAL”. Then repeatedly press the Forward
Skip (9) or Back Skip (8) buttons to reach the
desired station.
NOTE: The tuner will default back to AUTO
search mode 7-10 seconds of not being used.
3 Saving your station to MEMORY:
Now that you have selected a station you may
save it as one of your "Favorite Presets" so that
you can quickly return to it later if you wish. You
will notice the buttons on the left side of the
control panel are numbered 1 through 6. The
Memory function lets you save up to 6 of your
favorite stations in each "band" mode. A total of
30 stations can be stored in the memory.
If you have selected FM 1 as outlined above
and are ready to save your first station to memory,
press 1 and hold it for at least 2 seconds. You will
hear a "beep" when you press. Continue to hold
and in about 2 seconds you will hear a second
beep. This confirms that your station has been
saved. Now, if you will notice in the LCD display
you will see that you are in section FM 1, your
selected station frequency is displayed in the
center and on the right side of the LCD your first
saved selection is shown as CH 1.To add a
second preset station, use the Tune(8) or Skip(9)
button to locate the next station you want to save,
then press and hold button number 2 on the left
side of the control panel. You may add up to 6
stations in the FM 1 section. To save more stations,
repeatedly press the BAND button (11/32) to
advance to FM 2, FM 3, etc. and repeat the
above steps to locate and save more stations.
To listen to stations on the AM Radio band,
repeatedly press the BAND button (11/32) until
you see AM 1 or AM2. Then use the Tune(8) and
Skip(9) button to scroll through the AM stations.
You may also save up to 6 AM stations in each
AM section. Remember you must turn off the lights
& bubble tubes to receive stations in the AM mode.
AC
Polarized Plug