Industrial Data Systems IDS 410 - Manual (Page 13)

IDS 410/422 User's Manual
12
NTEP LABELING INSTRUCTIONS
Labeling Guidelines For NTEP Applications
These guidelines pertain to the use of the IDS 410/422 in NTEP (National Type Evaluation
Program) applications. If you are unfamiliar with NTEP, it is probable that this information can
be disregarded for your application.
NTEP has implications for “Legal-For-Trade” requirements only. These requirements generally
pertain to weighing scales that must be certified as accurate by local, state and federal Weights
and Measures officials.
CAPACITY n max=
CLASS III/IIIL 10,000
GROSS NET MOTION ZERO LB KG
GROSS
NET
ZERO TARE UNITS PRINT
CLEAR ITEM + - ENTER
For installations that are to be certified as “Legal-For-Trade”, install the NTEP label
approximately as shown.
The label consists of two parts, the label and the backing material. Carefully remove the backing
from the label and affix the label to the IDS 410/422 in the position indicated above.
Label text must be inserted by the user/installer in the space provided to reflect the
scale/weighing system capacity and minimum display increment (count-by). A permanent ink
marking pen or matte-finish vinyl lettering is recommended for this purpose. After the
appropriate information is in place, apply one of the supplied transparent overlays to protect the
complete label.