Industrial Data Systems IDS DT200 - Manual (Page 11)

9
3.1.4 CONFIGURE PRINTER
Activate the CONFIGURE menu and press the ENTER key when the DT210 displays 'CONFIG
PRINTER'.
The DT210 displays one of the following menu items:
PARALLEL ASCII
SERIAL ASCII
IDS150
IDS152
IDS160
Press the CONTINUE key to scan the menu.
If the PARALLEL ASCII or SERIAL ASCII is selected the DT210 prompts for additional data.
This enables the DT210 to be customized for different printers.
The DT210 prompts: "ADD LF TO CR N"
Enter a 'Y' to add a linefeed to each carriage return character, enter a 'N' to disable the additional
line feed character.
The DT210 prompts: "PAGE END PAUSE N"
Enter a 'Y' to pause at the end of each page when printing reports, enter a 'N' if the printer has
continuous paper.
The DT210 prompts: "LINE LEN = XX"
where xx is the current line length setting (26, 40 or 80). Press the CONTINUE key to scan the
line length menu, press the ENTER key to select the line length that is displayed.
The DT210 prompts: "END OF PRINT XXXX"
where xxxx is the hexadecimal code that is sent to the printer at the end of each page or ticket
that is printed (Usually the form feed character '0C'). Press the ENTER key to retain the
displayed code or enter a new code string.
The DT210 prompts: "SIZE 1 XXXX"
where xxxx is the hexadecimal code for print size 1 (normal print size).
The DT210 prompts for sizes 2, 3, 4, 5, and 6.