Jaclo Smooth back to back door handles w/finials - H20-BB-** - Manual

JACLO INDUSTRIES Phones: 908-653-4433 • 800-852-3906
129 Dermody Street Fax: 908-653-1717 • 800-852-4133
Cranford, NJ 07016 Website: www.jaclo.com
Installation Instructions for
Back-to-Back Door Handle Mount
H20, H21, H60, H61
& BB Series
1. Mark center of holes for mounting screws (6” centers). Align handle to door to insure accuracy.
2. Drill two 11/32” holes through door/glass.
3. Put small metal washers and spacer onto long screw in the following order: screw-washer-spacer-washer.
4. Put large rubber washer on base of escutcheon (for both handles).
5. Slide long screw (with fittings) into the top handle post, then through escutcheon and rubber washer
before pushing screw assembly through the door.
6. Slide other washer with escutcheon onto screw, then other handle post.
7. Loosely attach hex nut through handle onto screw.
8. Repeat procedure for bottom post.
9. Tighten screws.
10. To finish, snap caps over the four screw heads.
Part/ Product
Quantity Number Size
Door Handles (2) Varies
Screws (2) 30817-4 3/16”x 3-1/2”
Metal Washers (4) 30817-5 7/16”
Plastic Spacers (2) 30817-2 15/16”x 7/16”
Rubber Washers (4) 30817-1 1-15/16”
Escutcheons (4) 30756
Slotted Hex Nut (2) 30824-6
Caps (4) 4844
Slotted
Hex Nut
Cut-Away
View of Door
Cap Screw Plastic Handle Escutcheon
Spacer
Washers Rubber Drill
Washer Hole