Curtis DVD1100UK - Manual (Page 14)

SYSTEM SETUP
13
3. Audio setup menu
3.1Digital Output
Choose preferred option for digital output base on receiver connected to player
PCM: Output PCM audio data for receiver not support Dolby
and DTS decoding (mixed
primary audio, secondary audio and effect audio if available in disk)
Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio
only).
Re-encoded DTS: Output DTS data format for receiver if it support DTS decoding (mixed p
rimary audio, secondary audio and effect audio if available in disk)
Note: Not setting this item properly may result in noise.
Dolby Digital
DTS and DTS HD
ENTER: switch menu item : make choice
Audio Menu
Digital Output PCM
PCM Downsampling Off
Dynamic Range Control Off
BACK To Index Menu
3.2 PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as
some SPDIF receivers do not support 192 kHz or even 96 kHz).
48 kHz: Downsample audio with sample rates over 48 kHz.
96 kHz: Downsample audio with sample rates over 96 kHz.
Off : No downsampling on SPDIF output.
3.3 Dynamic Range Control: Reduces loudness difference between soft and loud parts of
the audio track.
On: Enables dynamic range control for all codecs.
Follow: Enables dynamic range control for all codecs. MLP streams use the
DRC level embedded in the audio stream itself.
Off: Turns off dynamic range control.
3.4 BACK: Return to main setup menu.