Canon LV 7365 - Manual (Page 31)

22
Connecting a Digital Video Signal (LV-7365/LV-7265)
To project a source from audio video equipment with a digital video output such as an HDMI or DVI connector,
use a commercially available HDMI-to-DVI cable or the optional DVI digital cable to connect the Computer 2 input
[DIGITAL IN/ANALOG IN-2] connector of the projector as shown below.
To output the sound in stereo, connect to audio equipment.
2. Installation and Connections
AUDIO IN
L R AUDIO OUT
L R
VIDEO OUT HDMI OUT
S-VIDEO VIDEO
AUDIO OUT
L R
VIDEO OUT
S-VIDEO VIDEO
DVI OUT
AUDIO OUT
S-VIDEO IN
VIDEO IN
L
AUDIO IN
R
SERVICE PORT
ANALOG IN-1
DIGITAL IN / ANALOG IN-2
AUDIO IN
DIGITAL IN/
ANALOG IN-2
AUDIO IN
(LV-7365 / LV-7265)
audio equipment
audio cable (not supplied)
audio video equipment
audio video equipment
dVi digital cable
(Optional: lV-Ca29)
hdMi-to-dVi cable
(not supplied)
NOTE: An image may not be displayed depending on the specifications of the audio video equipment being used.
dVi connector
hdMi connector
TIP: For users of audio video equipment with an HDMI connector:
Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”.
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.