Chauvet Indoor Furnishings - Manual (Page 11)

COLORrail™ IRC User Manual (Rev. 02) Page 11 of 20
Program Selection
To enable the Sound Active mode, do the following:
1) Press <MENU> repeatedly until Pr** shows on the display.
2) Press <ENTER>.
3) Use <UP> or <DOWN> to select the desired program (01~20).
4) Press <ENTER> to cycle through the different playback modifications. See the “Menu
Map” for details on which modifications are available.
5) Press <ENTER> when you arrive at the desired modification.
6) Use <UP> or <DOWN> to adjust the parameter of the modification.
7) Press <ENTER>.
Programs 01, 21, and 22 have unique options available. For this reason, they have
been listed in a separate section in the “Menu Map”. The available options allow you
to select one of 7 preset colors for both the background and the foreground.
Static Color
To enable the Sound Active mode, do the following:
1) Press <MENU> repeatedly until CoLr shows on the display.
2) Press <ENTER> to scroll through the three colors (red, green, blue).
3) Use <UP> or <DOWN> to modify the intensity of each color, thereby creating a custom
color mix.
2) Press <ENTER> when you arrive at the desired modification.
3) Use <UP> or <DOWN> to adjust the parameter of the modification (000~255).
2) Press <ENTER>.