Kofax Document Exchange Server 2.5 User Manual
Page 13
Kofax Front-Office Server Administrator’s Guide for Lexmark MFPs
Kofax, Inc.
13
Figure 7. Configuration for Kofax Front-Office Server
Note
The supported resolutions are 150, 200 (recommended), 300, and 400 dpi.
4
Click Apply.
X To check that the Kofax Front-Office Server application has started
1
On the Kofax Front-Office Server Configuration page, click the Solutions tab.
2
On the Installed Solutions page, under State, make sure Running is indicated in the State
column for Kofax Front-Office Server.
If Running is not indicated, start the Kofax Front-Office Server application as follows:
Select the check box to the left of Kofax Front-Office Server.
Click Start.
The State column indicates Running.
After closing the Lexmark Web page, note that a Kofax button is displayed on the MFP Home
screen.