Upgrading an existing installation, Continue with upgrading an existing – Kofax Document Exchange Server 2.0 User Manual

Page 16

Advertising
background image

Kofax Document Exchange Server Installation Guide for JBoss

12

Kofax, Inc.

7

Type the folder where Kofax Document Exchange Server will be installed. Use the default

folder or change it by clicking Choose and selecting the path from the window that

appears. The install path must be on a local drive and have a maximum of 65 characters. If

you want to switch back to the default folder, click Restore Default Folder. When you

have selected the folder, click Next.

Note

You cannot specify a UNC path or install Kofax Document Exchange Server on a

network drive.

8

Review the pre-installation summary (Figure 3). To start the installation, click Install.

Figure 3. Pre-Installation Summary

Note the following while the Installer is running:

„

Do not close the Installer window until the installation is complete. Interrupting the

installation can leave the system in an unrecoverable state.

„

If you are installing on the 64-bit version of Windows, the installation of Bonjour is not

a silent installation. You will be prompted to complete the Bonjour installation screens.

9

A screen indicates when the installation is finished. Click Finish to close the Installer.

Upgrading an Existing Installation

If you already have Kofax Document Exchange Server, you are prompted to upgrade it. The

upgrade preserves your existing settings and data, and you are not prompted to specify a new

administrator, database service password, and installation path.

During the upgrade, Kofax Document Exchange Server is shut down. We recommend that you

schedule the upgrade when Kofax Document Exchange Server is not used and inform users not to

use it during the upgrade.

Follow the steps in this section after you have started the Installer as shown in Starting the Installer
on page 10.

Advertising