English, Basic operations, Setting the dze (digital z-enhancer) – Clarion DFZ675MC User Manual

Page 9: Adjusting the tone, Adjusting the lpo (listening position optimizer), Adjusting the dze level, Adjusting the bass (gain, frequency, q-curve)

Advertising
background image

Basic Operations

13

DFZ675MC

English

Setting the DZE (Digital Z-Enhancer)

This unit is provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.

* The factory default setting is “DZE-OFF”.

Each time you press the [DIGITAL Z-EHCR]
button, the tone effect changes in the following
order:
“DZE-1”

➜ “DZE-2” ➜ “DZE-3” ➜ “DZE-OFF” ➜

“DZE-1”...
• “DZE-1”

: suitable for the coaxial speakers

• “DZE-2”

: suitable for separate speakers

• “DZE-3”

: moderate effect compared to

“DZE-1”, “DZE-2”

• “DZE-OFF” : no sound effect

Notes:
• The volume changes each time the DZE setting is

switched.

• Sufficient effects cannot be obtained with some

speaker systems. In such cases, adjust the
volume.

Adjusting the tone

1. Press the [A-M] button and select the item to

adjust.

2. Each time you press the [A-M] button, the

item changes as following order:

●When “DZE-1”, “DZE-2” or “DZE-3” is set

“LPO”

➜ “DZE LEVEL” ➜ “BALANCE” ➜

“FADER”

➜ Last function mode...

●When “DZE-OFF” is set

“LPO”

➜ “BASS” ➜ “TREBLE” ➜ “BALANCE”

➜ “FADER” ➜ Last function mode...

Notes:
• The display automatically returns to the previous

mode.

Adjusting the LPO (Listening
Position Optimizer)

This is the function that virtually optimizes the
speaker distances of each type of a car to the
listening position, which realizes the clearer
soundstage.
The setting value has to be adjusted to the
listening position and the type of your car.

* The factory default setting is “TYPE OFF”.

1. Press the [A-M] button and select “LPO”.
2. Turn the [ROTARY] knob to select the car

type. The adjustment options you can select
are as follows:

• “TYPE OFF”

: no car type selected

• “TYPE CMPCT” : suitable for compact car
• “TYPE SEDAN” : suitable for sedan
• “TYPE 1BOX”

: suitable for van

3. Press the [

R] or [F] button.

4. Turn the [ROTARY] knob to select seat

position. The adjustment items you can select
as follows:

• “SEAT F-L”

: front left seat

• “SEAT F-R”

: front right seat

• “SEAT REAR” : rear seats

* The factory default setting is “SEAT F-L”.

5. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the DZE level

You can adjust the DZE level in 3 steps and
register each adjustment respectively.
This adjustment can only be performed when the
DZE is set to “DZE-1”, “DZE-2” or “DZE-3”.

* The factory default setting is “0”

(Adjustment range: -3 to +3).

1. Press the [A-M] button and select “DZE

LEVEL”.

2. Turn the [ROTARY] knob to adjust the level.
3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the bass (Gain,
Frequency, Q-curve)

This adjustment can be performed when the DZE
is set to “DZE-OFF”.
1. Press the [A-M] button and select “BASS”.
2. Turn the [ROTARY] knob clockwise to

emphasize the bass; turning it
counterclockwise attenuates the bass.

* The factory default setting is “B<GAIN 0>”

(Adjustment range: –6 to +8).

3. Press the [

R] or [F] button to select

“B<FREQ 50>”.
Turn the [ROTARY] knob and select the
frequency.

* The factory default setting is “B<FREQ 50>”

(Adjustment options: 50/80/120 Hz).

4. Press the [

R] or [F] button to select

“B<Q 1.00>”.
Turning the [ROTARY] knob and select the Q-
curve.

* The factory default setting is “B<Q 1.00>”

(Adjustment options: 1.00/1.25/1.50/2.00).

5. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Advertising