Installation iii, Vertically on joists or pillars), Wiring diagram – Panasonic FV-30NLF1 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION III
(VERTICALLY ON JOISTS OR PILLARS)
Installing the IN-LINE Fan requires an accessible area (attic or
a«r extraction apparatus)
1.
Install the IN-LINE Fan using the first step deechbed in
INSTALLATION II.
2.
Extend insialation bracket arxl hang the unit on the joist
or piller. Fix with the long screws. (Fig.8)
CAUTION
Be careful not to drop the unit.
3.
Remove junction box cover and secure conduit or wire
holder to junction box cover knockout hole. (Fig.S)
4.
Using wire nuts, connect house power wire as shown in
the wiring diagram.
CAUTION
Mount junction box cover carefully so that wires are not
pinched.
wiring Diagram
5.
irtstall circular ducts (on both ends) and secise them
with tape or clamps.
Consult table 3 for the appropriate duct sizes.
Dimension: mm(inch
MODEL
10NLR
20NLFI
30NLFI
40NLR
duct 0
102
152
152
203
(4)
(6)
(6)
(8)
(table 3)
8