Optional equipment connections, Vcr connection, Procedure – Panasonic CT-32G8 User Manual
Page 6: Front control pane, Cable box connection, Front control panel, Digital tv - set-top box (dtv-stb) or dvd player, Connection, Opnomal e
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OpnoMAL E
quipment
C
onnections
I
_i
i
ILI
Optional Equipment Connections
Note:
The remote control must be programmed with supplied
codes to operate the optional equipment (EUR7613Z10
only}.
VCR Connection
VCRs, video disc piayers, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optionai equipment manual for more information.
Note for models with Component video input:
•
VIDEO 1 input Is a dual-purpose Input It is
primarily Intended for connection with 4801 devices
such as a DVD player using the Y
Pg P^
component video jacks and Audio L & R jacks.
However, it can also be connected to conventional
composite video sources such as a VCR, using
only the YA/ideo jack and Audio L & R jacks. The
on-screen label will display Component or Video 1
depending on which source is connected.
Note:
Rear AN jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for your
model’s capabilities.
Procedure
•
Connect equipment as shown to rear AudioA/ideo input
jacks.
•
Select the Video mode by pressing TVA/iDEO button.
•
Operate optional equipment as instructed in equipment
manual.
Front Control Pane!
The front control panel can be used to access menus and
stwitch video mode \when the remote controi is not
avaiiabie.
Note:
Front AN jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
A second VCR, Camcorder, a video disc piayer, video
game equipment or DSS equipment can also be connected
to the vidoeo inputs. See the optional equipment manuai.
Procedure
•
Connect equipment to front AudloA/ideo input jacks.
•
Select the Video mode by pressing TVA/iDEO button.
•
Operate optional equipment as instructed in equipment
manual.
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
COMMECT1GNS ON BACK OF THE TV
Note:
Rear AN jacks diagram may vary, depending on
model. Please refer to the FEATURE CHART on page
2 for your model’s capabilities.
Procedure
•
Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
•
Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top Box (DTV-STB) or DVD
Player Connection (some models)
Use this diagram to connect the Panasonic DTV-STB
(Digitai TV-Set-Top Box) to the back of your TV.
Note:
Rear AN jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for
your model’s capabilities.
Notes:
There are three video jacks, Y, Pg, artd Pp^.
Separate
component
color
inputs
provide
luminance and color separation. Use the L (left)
and R (right) audio Inputs.
Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
4
•