Changing the usb port protocol – Casio EX-Z1050 User Manual
Page 187
187
OTHER SETTINGS
You can use the procedure below to change the USB
communication protocol that is used when exchanging data with
a computer, printer, or other external device. Select the protocol
that suits the device to which you are connecting.
1.
Press [MENU].
2.
On the “Set Up” tab, select “USB” and then
press [
X].
3.
Use [
S] and [T] to select the setting you want
and then press [SET].
Changing the USB Port Protocol
When you want to connect to this type
of device:
Select this
setting:
Computer
With this setting, the computer sees the
camera as an external storage device.
Use this setting for normal transfer of
images from the camera to a computer
(using the bundled Photo Loader with
HOT ALBUM application).
Mass Storage
Printer that supports PictBridge (page
This setting simplifies the transfer of
image data to the connected device.
PTP
(PictBridge)