Acronova XB57 User Manual

Page 12

Advertising
background image

Operation Manual, Xymba XB47/57

V1.3

12

© 2010, Acronova Technology, Inc.

Reject Disc Tray
The Reject Disc Tray, with a 3 disc capacity, receives the rejected
discs. Pull down to open.

Reject Disc Slot
The slot where rejected discs will be discarded when the reject
tray is in its closed position.

Finish Disc Bin or Output Ramp

Depending on the configuration of your device during
purchase it may come with a Finish Disc Bin or Output
Ramp. The Finish Disc Bin is where completed discs
are stored. Be sure to unlock the Disc Storage
cabinet before removing the Finish Disc Bin. The
Finish Disc Bin must be in position during operation.
Completed Discs will be stacked in the Finish Disc Bin
with the labeled side facing down.

The Output Ramp configuration can receive up to five discs when in
position. Once the Output Ramp is full, any overflow discs will be
pushed off the ramp. The use of a container is
suggested to collect any overflow discs. The Output
Ramp must be in the pulled down position during
operation. Closing the Output Ramp during a
session will stop the operation immediately after the
current disc being written to has completed.

Completed Discs will be placed in the Output Ramp
with the labeled side facing up.

Rear View

USB Port
Connects Xymba to the
host PC.

Power Socket

Use the provided power
cord to connect Xymba to
a wall outlet.

Power Switch
Turn Xymba on and off.

Ventilation
This allows heat to escape. Do not block this otherwise the unit
may overheat.

Advertising
This manual is related to the following products: