Acura 2015 ILX - Owner's Manual - Manual (Page 284)

283
uu Replacing Light Bulbs u Rear License Plate Light Bulb
Main
tenan
ce
Rear License Plate Light Bulb
When replacing, use the following bulb.
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
3. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
4. Remove the old bulb and insert a new bulb.
High-Mount Brake Light Bulb
High-mount brake light bulbs are LED type. Have an authorized Acura dealer inspect
and replace the light bulbs.
Rear License Plate Light: 5 W
Fastener
Lining
Clip
Socket
Bulb
15 ACURA ILX-31TX66200.book 283 ページ ２０１４年３月２７日 木曜日 午前１０時３４分