Acura 2014 TL - Owner's Manual - Manual (Page 85)

These messages go off after several
seconds.
With the ignition switch in the ON
(II) position, the multi-information
display changes as shown on page
each time you press the INFO
( / ) button or the SEL/RESET
button.
When you turn the ignition switch
to the ON (II) position, your last
selection is displayed.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
and .
If you do not fasten your seat belt,
you will also see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
information display when you turn
the ignition switch to the ON (II)
position.
These messages go off several
seconds after the key is inserted into
the ignition switch.
:
184 187
81
CONTINUED
On models with keyless access system
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
79
SEL/RESET BUTTON
INFO BUTTONS ( / )
A/T model is shown.
12/07/20 10:39:49 31TK4640_084