Acura 2008 MDX - Owner's Manual - Manual (Page 99)

CONTINUED
Auto Interior Illumination
You can choose this customize item
from ‘‘METER SETUP’’ by pressing
the INFO ( / ) button repeatedly.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ELAPSED TIME RESET’’ and
repeat the procedure again.
While the headlight switch is turned
on, the interior lights gradually dim,
as the outside light level gets low.
You can customize at which outside
light level the lights start to dim.
There are MAX, HIGH, MID, LOW
and MIN levels and OFF for the auto
interior illumination settings.
If you want the illuminations to start
dimming as early as possible, select
MAX. For illuminations to start
dimming as late as possible, select
MIN. Choose HIGH, MID, or LOW
for levels in between.
To disable the auto interior
illumination function, select OFF.
Multi-Information Display
Inst
ru
m
ent
s
and
Cont
ro
ls
95
2008 MDX
Table Of Contents Main Menu