Acura 2008 RL - Owner's Manual - Manual (Page 416)

Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the fog lights to test the
new bulb.
Reinstall the two undercover bolts
on the side under cover and
tighten them securely. Put the
holding clip back on the side
under cover and push on the
center until it locks (the center is
flush with the head).
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise. Carefully push up the side under
cover into the bumper.
Use a Phillips-head screwdriver to
remove the two undercover bolts,
and remove the holding clip with a
flat-tipped screwdriver. 3.
4.
5.
6.
8.
7.
1.
2.
Lights
Ma
int
e
na
nce
413
CLIP
CONNECTOR
BULB
BOLTS
2008 RL
Table Of Contents Main Menu