Acura 2005 RL - Owner's Manual - Manual (Page 265)

If there is a problem with the
starting system, you will see a
‘‘CHECK STARTING SYSTEM’’
message on the multi-information
display when the ignition switch is
turned to ON (II). You will also see
this message when the auto control
mode of the starting system has a
problem.
If this message is on, the ignition
switch has to be held in the
START (III) position manually
until the engine starts. The
ignition switch can be held in that
position up to 15 seconds.
Even though you may be able to
start the engine manually without
the auto control mode of the starting
system, have your dealer inspect
your vehicle.
Starting the Engine
Check Starting System Message
264
Main Menu Main Menu Table of Contents