Acura 2004 RL - Owner's Manual - Manual (Page 71)

To change between low beams and
high beams, pull the turn signal lever
until you hear a click, then let go.
The blue high beam indicator will
light (see page
).
When the light switch is in either of
these positions, the Lights On
indicator comes on as a reminder.
This light remains on if you leave the
light switch on and turn the ignition
switch to ACCESSORY (I) or LOCK
(0).
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver’s door.
The rotating switch on the left lever
controls the lights. Turning this
switch to the
position turns on
the parking lights, taillights,
instrument panel lights, side marker
lights, and rear license plate lights.
Turning the switch to the
position turns on the
headlights.
62
U.S. models only
Headlights
Controls Near the Steering Wheel
Instruments and Controls 68
Main Menu Table of Contents