Acura 2004 RSX - Owner's Manual - Manual (Page 41)

Place the child seat on the vehicle
seat, and attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
Other LATCH-compatible seats have
a flexible-type connection as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit. Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Route the tether strap over the
seat-back, making sure the strap is
not twisted.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
3.
4.
5.
6.
7.
Installing a Child Seat
Driver and Passenger Saf ety 38
Rigid type Flexible type
Main Menu Table of Contents