Changing a flat tire – Acura 2000 Integra Sedan - Owner's Manual User Manual

Page 224

Advertising
background image

Changing a Flat Tire

If you have a flat tire while driving,
stop in a safe place to change it.
Stopping in traffic or on the shoulder
of a busy road is dangerous. Drive
slowly along the shoulder until you
get to an exit or an area to stop that
is far away from the traffic lanes.

1. Park the car on firm, level, non-

slippery ground away from traffic.
Put the transmission in Park.

Apply the parking brake.

2. Turn on the hazard warning lights

and turn the ignition switch to
LOCK (0). Have all the
passengers get out of the car while
you change the tire.

3. Open the trunk. Raise the trunk

floor by lifting up on the back edge.

4. Take the tool kit out of the trunk.

5. Unscrew the wing bolt and take

the spare tire out of the trunk.

CONTINUED

Taking Care of the Unexpected

TOOL KIT

SPARE TIRE

JACK

The car can easily roll off the
jack, seriously injuring anyone

underneath.

Follow the directions for

changing a tire exactly, and

never get under the car when it
is supported only by the jack.

Main Menu

Table of Contents

Main Menu

Advertising