CITIZEN CT-S2000 - Manual (Page 16)

— 13 —
● POWER LED
Illuminated when the printer power is on and off when the printer power is
off. May blink or light in a special mode or in case of failure.
● ERROR LED
Illuminated or blinks when paper is empty or in case of failure.
The interval length of blinking represents the type of error.
● FEED button
Pressing this button once causes the paper to feed one line. The longer the
button is pressed, the more paper is fed.
In case of auto cutter error, press the FEED button after removing the cause
of the error.
POWER LED
FEED button
ERROR LED
Interface connector
(Serial, parallel, Ethernet, etc.) Cash drawer
kick-out connector
Power connector
(DC power supply type)
Rear Connectors
Interface board
mounting screws
Operation Panel
AC inlet
(AC power type) USB connector
See 4.6 Error Indication
● Interface connector (Serial, parallel, Ethernet, etc.)
Connects to the interface cable. A DIP switch is provided on the serial interface
board.
● Cash drawer kick-out connector
Connects to the cable from the cash drawer.
● AC inlet (AC power type)
Connects to AC power cord
● Power connector (DC power supply type)
Connects to the cable from AC adapter.