AltiGen IP 720 - Manual (Page 18)

10 IP 720 User Manual
Headset button
When pressed, the user
will be able to activate the
RJ-9 headset port.
• This button is used as a hook
switch for headset ports.
• The button is used as a headset-in-
use indicator when a Plantronics
wireless PSB port is connected.
The headset on-hook and off-
hook is controlled by the
Plantronics headset module.
Hold button
Places an active call on
hold.
• When Multiple Call Waiting is
enabled at the extension, the user
can put multiple incoming calls
on hold and retrieve using the
phone’s /buttons and Enter
button.
• Pressing Hold while onhook will
retrieve the last hold call.
• Supports up to 9 hold calls.
Intercom
button
Connects you directly to
the callee’s intercom after
one ring.
Line Park
A parked call line
appearance can be
assigned as a
programmable Line Park
key by the administrator.
When connected to a
caller, the call can be
parked by pressing the
Line Park key. If a call is
parked at a Line Park line,
the button’s light is on.
The call can be picked up
by pressing the Line Park
key.
• When configured by the system
administrator, the IP phone can
play an audible beep or one of 14
different ring tones when a call is
parked.
• When configured by the
administrator, an alternate way to
pick up a parked call is to use #51
<line number> if Line Park is not
assigned to a programmable key.
• The Line Park key’s light will be
lit and turns off when the parked
call is picked up, the caller hangs
up, or the call is routed to IVR/
Auto Attendant.
Mute button
While on a call, mutes
conversation.
Feature Description Notes