AltiGen MAXCS 7.5 Upgrade Guidelines - Manual (Page 3)

AltiGen Communications, Inc. MAXCS 7.5 Upgrade Guidelines Page 3 of 7
o Codec Negotiation
o Codec Upgrades
o Codec Preference for Incoming SIP Trunk Calls
o Codec Preference for Outgoing SIP Trunk Calls
• Media Enhancements
o Media pass-through (HMCP)
o T.38 pass-through (not supported on PSTN trunks)
o FoIP extension
o FoIP Hunt group
o Fax routing
• Tool Enhancements
o Backup & Restore Tool updates
o Trace Collector Tool updates
• Enhanced SNMP trap monitoring
o SIP Trunk group status
o Out of license condition
o Out of Codec/Sip Trunk channels conditions
o Abnormal conditions (911, suspicious frauds, malicious SIP)
• HMCP tool enhancements
o DPC Latency measurement
o Generating Disk IP Load
o Generating CPU Load
o G.722 Codec Load
• Licenses
o Sightmax seat license
o Polycom Advanced Features license
• Workgroup enhancement
o A new repeating recording tone can be set for workgroup call recording. It will beep once every
15 seconds.
Features No Longer Supported in Release 7.5
As of Release 7.5, MAXCS no longer supports the following features:
• ACC is not longer supported.
• Windows 2003 Server OS for Softswitch is no longer supported.
• H.323 is no longer supported.
IMPORTANT: Any IP Dialing Table entries that have H.323 set for the Protocol field must be changed to SIP
before you upgrade .