AltiGen MAXCS 7.5 Telephony Hardware - Manual (Page 52)

MAX1000 System
46 Telephony Hardware Manual
• Two access board slots
Figure 1. MAX1000 system overview
The embedded DSP board provides the following resources for the system:
• 30 VoIP codec channels (G.711/G.723.1/G.729AB) for IP phone
• IP Tie-trunk, and SIP trunk service
• Dedicated voice processing (VM/AA) and voice recording resource for every trunk,
extension, VoIP channel
• 2 extension-based conference bridges (6 parties per conference)
• 2 MeetMe conference bridges (total 12 members maximum)
• 2 silent monitor/barge-in/coach channels for workgroup supervisor
•
Music on hold (input source can be either a file or audio-in port)
•
Paging (IP paging, audio-out port, trunk/station port paging)
MAX1000/2000 Series Access Boards
An access board works together with the main DSP board to provide the telephony
interface such as analog extension, analog trunk, and digital trunk (T1/E1/PRI).
The MAX series of telephony access boards consists of the following options:
• ALTI-M0404-T1E1 (4 analog trunks, 4 analog extensions, 1 T1/E1/PRI port)
• ALTI-M0804 (8 analog trunks, 4 analog extensions)
• ALTI-M0408 (4 analog trunks, 8 analog extensions)
• ALTI-M0012 (0 analog trunks, 12 analog extensions)
• ALTI-M0000-T1E1 (single T1/E1/PRI) (supported in MAX Communication Server 6.0
Update 1 and above)