Transfer a line-parked call – AltiGen MAXCS 7.5 Polycom VVX User Guide User Manual
Page 9
MAXCS 7.5 Polycom VVX User Guide
Page 9
If your Administrator configured a “Splash Display” feature for you, you will see an alert with the caller name, and you
may hear a ring tone for a few seconds.
While a call is parked:
•
The Line Park softkey will flash green.
•
You can tap and hold that Line Park softkey to reveal the Caller’s information.
•
You can tap Ignore to dismiss the ring display and silence the ring, or tap Silence to silence the ring.
3
When you are ready to retrieve a parked call, tap Pickup.
Transfer a Line-parked Call
Note: When transferring calls to or from a Polycom phone, in some scenarios the Caller ID will show as your ID
instead of that of the original call.
To transfer a line-parked call,
1
After picking up the call, tap Transfer.
2
Tap More.
3
Tap Number.
4
Enter the number and tap Transfer.