AltiGen MAXCS 7.0 Update 1 CDR - Manual (Page 69)

Records and Data Schema
CDR Manual 65
Re
co
rd
s an
d
Data S
c
hema
StartPriority
Call priority at Start
Time (1-9)
LONG
EndPriority
Call priority at End Time
(1-9)
LONG
CallerType
Type of line for an
incoming call
LONG
0 = Unknown line type
1 = Ext analog
2 = Ext IP
3 = Reserved
4 = Ext virtual
5 = Workgroup
6 = Application Extension
7 = Analog Trunk
8 = T1 Trunk
9 = IP Trunk
10 = PRI Trunk
11 = not used
12 = E1 trunk
CallerPad
Line’s physical address
for an incoming call CHAR
(5)
E.g. “0004”, where
“00”=slot, “04”=channel
Always “-1-1” for WG or
virtual extension
CallerNum
Caller phone number of
an incoming call
(extension number or
off-net PSTN)
CHAR
(41)
CallerName
Caller name for an
incoming call (provided
by CO for trunk calls; as
entered in MaxAdmin
for extension calls)
CHAR
(65)
CallerTenant Caller Tenant name CHAR
CallerProject Caller Project ID LONG
Database Element Definition Type Specification