Parts checklist, Introduction, Before proceeding – American Access Systems Advantage DKLP - Single Gang - 19-100sg User Manual

Page 3

Advertising
background image

Page 3 American Access Systems / Security Brands, Inc.

PARTs CHECKLIsT

Enclosed with this box you should have the following items.

Qty

Description

1

Control station

2

6/32 x 1/2 Machine screws

2

6/32 x 1/2 snake Eye screws

1

Outdoor Weather Gasket

If any of the above items are missing from this box, contact American Access systems

Tools Needed For Basic Installation

• • Wire nuts or appropriate connectors
• • Wire strippers
• • Wire cutters
• • 3/8” drive ratchet with 6” extension and 7/16” socket (Post mount units only)
• • Digital or Analog multi-meter

TECHNICAL/CUsTOMER sUPPORT

1-303-799-9757 OR

[email protected]

INTRODUCTION

Your new DKLP unit is a high quality, commercial grade, programmable digital key control station. The unit is
designed to operate at extremely low current and therefore is perfect for solar applications or conditions which
require very little current draw. The unit incorporates a single relay with a normally open and normally closed output.
Please be sure to read and understand all instructions before proceeding with the hookup and programming
instructions.

BEFORE PROCEEDING

To take full advantage of the 24 month limited warranty, you must be registered with American Access Systems.
Please read the enclosed warranty statement, (pg 2), fill out the warranty registration card provided and send it to:

1675 West Yale Ave.

Englewood, CO 80110

phone: 303-799-9757

fax: 303-799-9756

[email protected]

www.securitybrandsinc.com

SECURITY

BRANDS

INC

Advertising