American Diagnostic Corporation (ADC) 424 Adtemp - Manual (Page 7)

• Opening or altering the instrument invalidates the warranty.
• The warranty does not cover damage caused by improper handling, discharged batter-
ies, accidents or non-compliance with the operating instructions. Contact ADC® Customer
Service Dept. for more information.
13. Technical Specifications
Type: Ear Thermometer 424
Measuring Range: 89.6°F ~ 108°F (32°C ~ 42.2°C)
Accuracy: Laboratory: : ±0.2 °C, 32.0 ~ 42.2 °C
±0.4 °F, 89.6 ~ 108.0 °F
Display: Liquid Crystal Display with 0.1 °C (0.1 °F) resolution.
Beeps When: a. The unit is turned ON and ready for measurement: (1 short “beep“ sound)
b. Measurement complete: 1 long beep sound.
c. System error, malfunction, or “Hi””Low” measurement. 3 short “beep“
sounds.
Memory: Automatically displays the last measured temperature.
Illuminated Display: a. The display will be lighted for 4 seconds when the
(Back-Lite) unit is turned ON.
b. The display will be lighted again for 5 seconds when
the measurement has been completed.
Operating Temperature: 10°C to 40 °C (50.0 °F to 104 °F)
Storage/Transport Temp: -25 °C to +55 °C (-13 °F to 131 °F)
Automatic Switch-off: Approx. 1 minute after last measurement has been taken.
Battery: 1 each CR2032 BATTERY - at least 1000 measurements
Dimensions: 5.5” x 1” x .79” (141mm L x 26 mm W x 20 mm H)
Weight: 1.59oz. (45g) (with battery), 1.41oz. (40g) (w/o battery)
Device Standard: Device corresponds to the requirements of the standard
for infrared thermometers
ASTM E 1965, EN 12470-5, ICE 60601-1, IEC 60601-1-2
Electromagnetic Device fulfills the stipulations of the standard
Compatibility: IEC 60601-1-2
ADC
55 Commerce Drive
Hauppauge, NY 11788
U.S.A.
ADC (UK) Ltd.
Unit 6, PO14 1TH
United Kingdom
Inspected in the U.S.A.
Made in China
tel: 631-273-9600, 1-800-232-2670
fax: 631-273-9659
www.adctoday.com
email: [email protected]
IB p/n 93-424-00 english
EC REP