CON-TECH CS2000-QD - Manual (Page 3)

- 1 -
General Information
Features:
• 10 to 30 VDC input - reverse polarity protected
• Fast RISC microprocessor controlled
• Easy one touch setup - label sensitivity easily adjusted, to the optimal setting, by
the push of a button
• Missing label compensation - outputs a stop pulse even when a label is missing
• Level shift or leading edge pulse output selectable
• Light or dark operation selectable
• Low label contrast setting available
• Push-button may be momentarily depressed to output a stop pulse - very useful
during machine setup
• All settings saved in nonvolatile memory (EEPROM) - settings are not affected
by power loss
• NPN or PNP output selectable - 100mA, open collector, reverse polarity and
short circuit protected
• Precision machined and double anodized aluminum housing
• 8 mounting holes - allows for many different mounting options
• Large throat - 3" deep x 0.093 wide
• Optional 6" quick disconnect M12 - 4 pin male cable/connector (Turck P/N RS4.4T-2)