AOC L26W898 User Manual
Page 34
Advertising
33
Input Block: To set the input source to be blocked. Users will not be able to watch the content
coming from the blocked input source.
Use ENTER button to block the input source, and press ENTER again to unblock.
Change Password: To change the password, press ENTER, and the following screen
appears.
Enter the new password from the remote control, and then enter the new password again to
confirm.
Note: Please mFake sure you remember your new password after changing, because you cannot recall
the default setting of the password by any selection.
Clean All: To clear all the locks set before, press ENTER, and then select “OK” to confirm.
Advertising