AOC L47H861 - Manual (Page 19)

18
Englis
h
Englis
h
Englis
h
Englis
h
3. Connect the R (red color) and L (white
color) audio connectors on your DVD
player to the corresponding R (red color)
and L (white color) audio input connectors
in the AV group.
4. Turn on the power to the HDTV and DVD
Player.
5. Select Composite (Video 1) using the
INPUT (SOURCE) button on the remote,
side of the HDTV or directly by pressing
the AV button on the Remote Control.
Connecting Your VCR or Video Camera
1. Turn off the HDTV and VCR or Video
Camera.
2. Connect the S-Video jack on the rear of
your VCR or Video Camera to the S-Video
jack in the AV group on the rear of the
HDTV.
3. Connect an audio cable (white and red
connectors) cable to the audio output
connectors associated with the S-Video
output on your VCR or Video Camera
and connect the other end to the audio
connectors associated with the AV input
on the rear of the HDTV.
4. Turn on the power to the HDTV and VCR
or Video Camera.
5. Select S-Video (Video 2) using the INPUT
(SOURCE) button on the remote, side of
the HDTV or directly by pressing the AV
button on the Remote Control.
NOTE
 Refer to your VCR or Video Camera user
manual for more information about the
video output requirements of the product.
Connecting to a PC
1. Turn off the power to the HDTV and PC.
2. Connect a 15-pin D-Sub RGB (VGA) cable
to the RGB output of your PC IN and the
other end to the PC input at the rear of
the HDTV.
3. Connect the Audio Out on your computer
to the RGB PC Audio input at the rear of
the HDTV.
4. Turn on the HDTV and PC.
5. Select RGB(PC) using the INPUT
(SOURCE) button on the remote, side of
the HDTV or directly by pressing the PC/
HDMI button on the Remote.
NOTE
 For the best picture quality when
connecting a computer through RGB PC,
set your computer timing mode to native
resolution of panel. Please refer to the PC
or graphic card’s user guide for additional
information on how to set the timing
mode and the video output requirements
of the product.