Audio Note Gaku-on - Manual (Page 10)

Line inputs Being mono power amplifiers, each GAKU-ON chassis is fitted with
one XLR / Balanced input, located at the front of the left hand side of
each amplifier. Connect the outputs from your preamplifier to these
inputs.
Ground Post A ground post is provided for connection to those source components
that also use a separate ground terminal.
Speakers
Each amplifier is equipped with 2 colour coded binding posts for
connection to your speakers.
Connect the amplifiers black speaker output binding post to the black /
negative terminal (also marked “ – “) on the speaker.
Connect the amplifiers red speaker output binding post to the red /
positive terminal (also marked “ + “) on the speaker.
Mains
The GAKU-ON use an IEC 320 mains inlet socket for each chassis.
Use the supplied mains cables to connect the units to the local mains
supply. The mains fuses are located in separate fuse holders located
on the rear panel of each chassis.
Special Note – Make sure that all connections are tight and clean. For
best results use good quality audio interconnects. Although it is
perfectly acceptable to use cables manufactured by other companies,
for best results and performance, we recommend our own Audio Note
(UK) range of interconnects and loudspeaker cables. For further
information, please consult your nearest Audio Note (UK) dealer, or
alternatively please feel free to contact us directly.
CONNECTION