Audio Note AX-One Speaker - Manual (Page 7)

HIGH
FREQUENCY
(HF)
LOW
FREQUENCY
(LF)
BLACK /
NEGATIVE (-)
RED /
POSITIVE (+)
AX-ONE
!
BEFORE ATTEMPTING TO CONNECT THE AX-ONE TO YOUR AMPLIFIER,
ENSURE THAT IT IS DISCONNECTED FROM THE MAINS SUPPLY!
Choose loudspeaker cables that are long enough to comfortably reach from your
amplifier to the AX-ONE without stretching or pulling tightly; it is always better to have
a loudspeaker cable that is too long rather than too short!
On the rear of each speaker are two pairs of binding posts; the top two are for HIGH
FREQUENCY (HF) and the lower two are for LOW FREQUENCY (LF). Each binding
post is colour coded either
RED or BLACK; the RED binding posts connect to the
RED / POSITIVE (often marked ʻ + ʼ) loudspeaker outputs on your amplifier, and the
BLACK binding posts connect to the BLACK / NEGATIVE (often marked ʻ-ʻ)
loudspeaker outputs on your amplifier.
CONNECTION