Avlink HD-01W - Manual

HDMI to DVI
Conversion Box
HD-01W
U SER M ANUAL
V1.0
HD-01W
Package Contents-
ƒ 1 HD-01W Unit
ƒ 1 User manual
ƒ 1 Power adapter DC 12V
ƒ 2 Screws
ƒ 4 foot pads
ƒ 1 HDMI cable 1.8M
Any thing missed, please contact with your vendor.
Introduction
The HD-01W Converter connect computer with HDMI
connector to DVI monitor or projector. The converter
changes your HDMI signal to DVI graphic signal, so that
cost-effected DVI display device or projector can be
connected to your HDMI output easily and conveniently.
Features
ƒ Use Panel Link digital technology.
ƒ Compliant with the specification of DVI 1.0.
ƒ Support high-resolution display up to WUXGA or
1080P@60Hz (25-165MHz).
ƒ Connect PC or DVD player with HDMI connector to
digital monitor or projector.
Specifications
Function HD-01W
Input Connector 1x HDMI (Female)
Output Connector
1x DVI-I (Female)
1x 3.5Ø stereo plug (Female)
Input HDMI support
WUXGA or 1080P@60Hz
(Max.)
Output DVI support
WUXGA or 1080P@60Hz
(Max.)
HDMI Cable Distance
(Single end)
10 m (Max.)
DVI Cable Distance
(Single end)
10 m (Max.)
Power Adapter (Min.) DC 12V
Housing Metal
Weight 283g
Dimensions (LxWxH) 150x92x25mm
Note:
Different cable qualify might effect upon the maximum
resolution and cable distance.
-1-
FRONT VIEW
1. “Audio Out” Port
2. Green LED “Power on”/ Red LED “NO Video ”
3. “DVI Out” Port
4. Input Power Jack
REAR VIEW
1. “HDMI In” Port
Installation
1. Connect the HD-01W video input HDMI connector with
HDMI cable from different video equipment.
2. Connect the DVI Male extension cable between the
monitor and the “DVI Out” port of HD-01W.
3. Connect the power cord and turn on the HD-01W.
4. Turn on the HDMI video source device.
-2-