Avlink MRM-602P - Manual (Page 29)

M M M R R R M M M - - - 6 6 6 0 0 0 2 2 2 P P P
28
 The Device ID is based on the DIP of switcher located on the rear panel.
Slide the scrollbar on the lower left area of main window to view all contents (including ID,
Name, Audio, Video, Input, Output, Memory, VI Plug, AI Plug, VO Plug, AO Plug, EDID
Type, Volume, Bass, Treble, Subwoofer, Delay, Delay Unit, Max Delay and Version) as
described below:
ID: Specify the ID address of Switcher switching device.
Name: The name of Switcher switching device.
Audio/Video: Specify the character of audio or video. Or both of audio and video are
supported will both show “Support”.
Input/Output: Ports quantities of Input and Output.
7.2.1 Main Operation Interface
You can slide the scrollbar on the Input / Output area to view all configured ports. For the
basic operation is described as below:
Examples for selecting switching functions:
Example: Now there is an MRM-602P Switcher having all the input/output ports properly
connected to the equipment. If you want to set channel 1 VGA input to output displayer
with HDMI OUT interface. Please follow the ways and steps to finish the switching
functions:
First way: Directly click on the corresponding icons on the AV Matrix to transform it
into to complete the switching operation.
Second way:
First select the “Output” number keys 001, and select the “Input” number key 001 to
the bottom. This way, you have selected “VGA+AUDIO INPUT” 001 and output with
“HDMI OUT” switching.
Upon completion of the above ways, you have actually completed the switching
operation of having channel 1 VGA input to the output displayer with HDMI OUT.
The main configuration window also shows you some function buttons to easy operation:
Switch Tab: Click “Switch” tab to show the main configuration window about switching.