Avlink YX-3088 - Manual (Page 20)

YX Matrix Switching System—User Manual
19
Key LCD Display Operation
2.Press the NO.1 key of the Input
channel for 2 seconds for selection
of NO.1 channel to input into
NO.3 channel for output. The
LCD shows 1 at channel NO.3
for both Audio and Video. Enter
the Output channels.
3. Press the NO.4 key of the
output channel for 2 seconds and
then enter the input channel when
the red 0 on LCD flickers.
4. Press the NO.1 key of the input
channel for 2 seconds for selection
of NO.1 channel for input and
NO. 3 and 4 channels for output.
LCD shows 1 at NO.3 and NO.4
channels for both Audio and
Video.
Example 2: Operation for synchronously switching video signals from NO.4 channel to NO.1, 3,
5 and 6 output channels.
Key LCD Display Operation
1. Press the AUDIO key to
turn off the LED indicator,
then enter the output channel.
2. Press the NO.1 key of the output
channel for 2 seconds, then enter the
input channel when the red 0 on
LCD flickers.
3. Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1
channel. Enter the output channel
when VIDEO shows 4 at NO.1
channel on LCD.