Both – Avlink PG-H1 User Manual
Page 12
11
P02 Blinking
mode configuration:
Press the set indicated key to enter the black and white
setting configuration as below (you can set the black and
white blinking frequency (frames/value) here):
“▲”: Increase the BLK or WHT blinking frequency value.
The value is up to 255.
“▼”: Decrease the BLK or WHT blinking frequency
value.
“ ▲ ”,” ▼ ”: Switch between BLK and WHT options.
“
”: Confirm the changed value.
)
1. Both
BLK/WHT
are the condensations for
Black/White
.
2. The bigger Value is set, the lower blinking frequency
is supported.
3. When the value is 001, the “▼” indicated key is no
any function.
3.3.3 Func configuration
Press the Func indicated key, the Func configuration
screen will be showed as below:
a. Setup:
Press the Setup indicated key, the Setup
configuration screen will be showed as below: